INGREDIENT CHEMICAL NAME

OSHA PEL

ACGIH TLV

OTHER LIMITS RECOMMENDED

CAS NUMBER

Butyl Benzyl Phthalate

NE

5ppm

N/A

85-68-7

Dioctyl Adipate

NE

NE

N/A

103-23-1

Drgano-Barium Zinc Complex

NE

NE

N/A

Trade Secret

BOILING POINT:

414-698°F

SPECIFIC GRAVITY (H2O=1):

1.2273

VAPOR PRESSURE (mm Hg):

N/A

MELTING POINT:

N/A

VAPOR DENSITY (AIR = 1): 

Is heavier than air

EVAPORATION RATE (Butyl Acetate = 1):

Is slower than Ether

SOLUBILITY IN WATER:

Soluble in S150

APPEARANCE AND ODOR:

Colored paste with solvent odor

FLASH POINT (METHOD USED):

203°F

FLAMMABLE LIMITS

N/A

EXTINGUISHING MEDIA:

WATER FOG  x

STANDARD FOAM  x

CO₂ x

DRY CHEMICAL  x

HALON 

UNUSUAL FIRE AND EXPLOSION HAZARDS:

Vapors may form explosive mixture with air.  Vapors can travel to a source of ignition and flash back.  Combustible Liquid.  Can form explosive mixtures at temperatures at or above the flashpoint.  “Empty” containers retain product residue (liquid and/or vapor) and can be dangerous.  DO NOT PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL, GRIND, OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS, STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION; THEY MAY EXPLODE AND CAUSE INJURY OR DEATH.  Empty drums should be completely drained, properly bunged and promptly returned to a drum reconditioner, or properly disposed of.

SPECIAL PRECAUTIONARY STATEMENTS:

Containers con build up pressure if exposed to heat (fire).  As in any fire, wear self-contained breathing apparatus pressure-demand (MSHA/NIOSH approved or equivalent) and full protective gear.  Water runoff can cause environmental damage.  Dike and collect water used to fight fire.

STABILITY: 

x Stable  Unstable

Incompatibility :

No information

Hazardous Decomposition:

No information

HAZARDOUS POLYMERIZATION:     

May Occur   xWill not occur

Conditions to Avoid:

No information

INGESTION:  

No information

EYES:                  

Liquid, aerosol and vapors of this product are irritating and can cause pain, tearing, reddening and swelling accompanied by a stinging sensation and/or a feeling like that of fine dust in the eyes.

INHALATION:       

Prolonged inhalation may be harmful.  Reports have associated repeated and prolonged occupational overexposure to solvents with brain and nervous system damage.  Intentional misuse by inhaling the contents may be harmful.

SKIN:

Prolonged or repeated contact can result in defatting and drying of the skin which may result in skin irritation and dermatitis (rash).

INGESTION:

No information

EYES:

Immediately flush eyes with plenty of water.  Get medical attention, if irritation persists.

INHALATION:

Remove to fresh air.  If not breathing, give artificial respiration.  If breathing is difficult, give oxygen.  Get immediate medical attention.

SKIN:

Wash with soap and water.  Get medical attention if irritation develops or persists.

STEPS TO BE TAKEN IN CASE LARGE AMOUNTS ARE RELEASED:

Dispose in accordance with State, local and Federal regulations.  Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical waste container.  Avoid runoff into storm sewers and ditches which lead to waterways.  Wear a self-contained breathing apparatus and appropriate personal protective equipment.  (See Exposure Controls/Personal Protection Section)

WASTE DISPOSAL METHOD:

Dispose in accordance with State, local and Federal regulations.

PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE:

This product is to be used for industrial or professional uses only and is to be applied only by those who are trained in its safe and proper application.  When transferring material ground and bond containers and use spark proof tools and explosion proof equipment.  Wash thoroughly after handling.  Keep away from heat, sparks and flame.  Keep container closed when not in use.

OTHER PRECAUTIONS:

N/A

RESPIRATORY PROTECTION:

A NIOSH/MSHA approved air purifying respirator with an organic vapor cartridge or canister may be permissible under certain circumstances where airborne concentrations are expected to exceed exposure limits.  Protection provided by air purifying respirators is limited.  Use a positive pressure air supplied respirator if there is any potential for an uncontrolled release, exposure levels are not known, or any other circumstances where air purifying respirators may not provide adequate protection.

VENTILATION:

Sufficient ventilation, in volume and pattern, should be provided to keep air contamination below current applicable OSHA permissible exposure limit or ACGHI’s TLV limit.  Good general ventilation should be sufficient to control airborne levels.  Local exhaust ventilation may be necessary to control any air contaminants to within their TLV’s during the use of this product.  Use explosion-proof ventilation equipment.  Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower.

LOCAL EXHAUST:

N/A

PROTECTIVE GLOVES:

Where contact is likely, wear chemical resistant gloves, a chemical suit, rubber boots, and chemical safety goggles plus a face shield.

EYE PROTECTION:

Wear safety glasses with side shields (or goggles) and a face shield.

HEALTH:  1

HAZARD RATING KEY

FLAMMABILITY:  0

0 = MINIMAL

REACTIVITY:  0

1 = SLIGHT

PERSONALPROTECTION:

2 = MODERATE

3 = SERIOUS

4 = SEVERE

* = CHRONIC HEALTH EFFECTS