INGREDIENT CHEMICAL NAME

OSHA PEL

ACGIH TLV

OTHER LIMITS RECOMMENDED

CAS NUMBER

N/A

N/A

N/A

N/A

N/A

BOILING POINT:

Unknown

SPECIFIC GRAVITY (H2O=1):

N/A

VAPOR PRESSURE (mm Hg):

N/A

MELTING POINT:

N/A

VAPOR DENSITY (AIR = 1): 

Heavier than air

EVAPORATION RATE (Butyl Acetate = 1):

Slower than ether

SOLUBILITY IN WATER:

N/A

APPEARANCE AND ODOR:

N/A

FLASH POINT (METHOD USED):

Over 200°F

FLAMMABLE LIMITS

Unknown

EXTINGUISHING MEDIA:

WATER FOG  x

STANDARD FOAM  x

CO₂ x

DRY CHEMICAL  x

HALON

UNUSUAL FIRE AND EXPLOSION HAZARDS:

Material in itself is normally stable but can become unstable at elevated temperatures and pressures, or may react with water with some release of energy, but not violently.

SPECIAL PRECAUTIONARY STATEMENTS:

Water may be used to cool closed containers, to prevent pressure build-up.

STABILITY: 

x Stable  Unstable

Incompatibility :

Acidic materials, anhydrides, and strong oxidizers.

Hazardous Decomposition:

Normal combustion products including carbon dioxide, carbon monoxide, and oxides of nitrogen.

HAZARDOUS POLYMERIZATION:     

May Occur   xWill not occur

Conditions to Avoid:

Contamination with acidic material.

INGESTION:  

Harmful if swallowed.

EYES:                  

Corrosive to eyes; caused eye burns.

INHALATION:       

Breathing mists may cause lung damage and/or allergic reaction.

SKIN:

May cause irritation.  Repeated or prolonged contact may cause sensitization.

INGESTION:

Consult physician.

EYES:

Flush immediately with large quantities of running water for at least 15 minutes.  Consult physician.

INHALATION:

Remove to fresh air.  Consult Physician.

SKIN:

Wash affected areas with soap and water.  Remove contaminated clothing.

STEPS TO BE TAKEN IN CASE LARGE AMOUNTS ARE RELEASED:

Remove with inert absorbent.  Flush remaining material with water.  Decontaminate with dilute aqueous ammonium thiosulfate.  Before attempting clean-up, refer to hazard caution information in other sections of this sheet.

WASTE DISPOSAL METHOD:

Dispose in accordance with local, state, and federal regulations.  Incinerate in approved facility.  Do not incinerate in closed containers.  While discarded product is not a hazardous waste under RCRA Regulations (40 CFR 261), untreated material should not be released to be environment.

PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE:

Warning:  Avoid contact.  Very irritating to eyes.  Contact with skin may be harmful.  Mist generated from spray application may be harmful if inhaled.  Chemicals similar in structure to CX-100 have been found to cause cancer in laboratory animals.  To protect yourself you must wear safety goggles, impervious gloves, and protective clothes while handling this material.  You must wear a respirator during spray operations.

OTHER PRECAUTIONS:

Store in a cool, dry place.  Do not puncture containers or expose product to moisture.

RESPIRATORY PROTECTION:

N/A

VENTILATION:

Provide general dilution or local exhaust ventilation to remove solid air borne particles of over spray during spray application and remove decomposition products during welding or flame cutting on surfaces coated with this product.

LOCAL EXHAUST:

N/A

PROTECTIVE GLOVES:

Butyl rubber, North Hand Protection style B-131 or equivalent.

EYE PROTECTION:

Chemical safety goggles.

HEALTH:

HAZARD RATING KEY

FLAMMABILITY:

0 = MINIMAL

REACTIVITY:

1 = SLIGHT

PERSONALPROTECTION:

2 = MODERATE

3 = SERIOUS

4 = SEVERE

* = CHRONIC HEALTH EFFECTS