INGREDIENT CHEMICAL NAME

OSHA PEL

ACGIH TLV

OTHER LIMITS RECOMMENDED

CAS NUMBER

High Boiling Methacrylate

N/A

N/A

N/A

Proprietary

Photoinitiator

N/A

N/A

N/A

947-19-3

Polyurethane Oligomer

N/A

N/A

N/A

Proprietary

High Boiling Acrylate

N/A

N/A

N/A

Proprietary

High Boiling (Meth) Acrylate

N/A

N/A

N/A

Proprietary

Acrylic Acid

N/A

2 ppm

N/A

79-10-7

High Boiling (Meth) Acrylate

N/A

N/A

N/A

Proprietary

BOILING POINT:

N/A

SPECIFIC GRAVITY (H2O=1):

1.03

VAPOR PRESSURE (mm Hg):

6 mm Hg @ 30°C

MELTING POINT:

VAPOR DENSITY (AIR = 1): 

Heavier than air

EVAPORATION RATE (Butyl Acetate = 1):

N/A

SOLUBILITY IN WATER:

Insoluble

APPEARANCE AND ODOR:

Amber Liquid; Mild

FLASH POINT (METHOD USED):

>200°F (P.M.C.C.)

FLAMMABLE LIMITS

N/A

EXTINGUISHING MEDIA:

WATER FOG  x

STANDARD FOAM  x

CO₂ x

DRY CHEMICAL  x

HALON 

UNUSUAL FIRE AND EXPLOSION HAZARDS:

None

SPECIAL PRECAUTIONARY STATEMENTS:

N/A

STABILITY: 

x Stable  Unstable

Incompatibility :

Oxidizers, amines, strong Lewis or mineral acids, thiosulfates.  Smoke and toxic fumes may be evolved as a result of uncontrolled exothermic reaction of large masses of material reacting with curing agents, such as peroxides, amines, or exposure to light.

Hazardous Decomposition:

None.

HAZARDOUS POLYMERIZATION:     

xMay Occur  Will not occur

Conditions to Avoid:

N/A

INGESTION:  

N/A

EYES:                  

Possible irritation on contact.

INHALATION:       

Inhalation of vapors in an unventilated area may, over time, induce headaches.

SKIN:

Possible irritation on contact.

INGESTION:

Low toxicity; Get medical attention.

EYES:

Immediately flush eyes with plenty of water for at least 15 minutes.  Get medical attention.

INHALATION:

Remove affected person to fresh air.

SKIN:

In case of skin contact, wash thoroughly with soap and water.  Do not use organic solvents for cleanup as they may dry or irritate the skin and act as a carrier for chemical absorption.

STEPS TO BE TAKEN IN CASE LARGE AMOUNTS ARE RELEASED:

Dike area to prevent spreading.  Absorb on vermiculite, sand or other inert absorbing material.  Dispose of as a chemical waste in accordance with current local, state, and federal regulations.

WASTE DISPOSAL METHOD:

N/A

PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE:

Avoid prolonged or repeated breathing of vapor.  Avoid storage over 100°F, exposure to light, loss of dissolved air, loss of polymerization inhibitor, contamination with incompatible materials.

OTHER PRECAUTIONS:

N/A

RESPIRATORY PROTECTION:

Positive fresh air exhaust should be provided in the work area; respiratory equipment in unnecessary in normal use.

VENTILATION:

N/A

LOCAL EXHAUST:

N/A

PROTECTIVE GLOVES:

Avoid skin contact.  Wear gloves and impervious protective clothing if frequent direct contact in likely.

EYE PROTECTION:

Do not wear contact lenses.  Chemical safety goggles are recommended.

HEALTH:  2

HAZARD RATING KEY

FLAMMABILITY:  1

0 = MINIMAL

REACTIVITY:  1

1 = SLIGHT

PERSONALPROTECTION:

2 = MODERATE

3 = SERIOUS

4 = SEVERE

* = CHRONIC HEALTH EFFECTS