Thursday 17 May 2012
  • Increase font size
  • Default font size
  • Decrease font size
  • default style
  • blue style
  • green style
  • red style
  • orange style
Print

LRC-4, LRC-G LEATHER REPAIR COMPOUND

Written by Super User. Posted in MSDS SHEETS

SECTION I - PRODUCT  IDENTIFICATION

 

Product  Name:  LRC-4, LRC-G  LEATHER REPAIR COMPOUND                                    

Revision:  08/07/02        

SECTION II - HAZARDOUS INGREDIENTS & OTHER COMPONENTS

INGREDIENT CHEMICAL NAME

OSHA PEL

ACGIH TLV

OTHER LIMITS RECOMMENDED

CAS NUMBER

PVC resin

Not hazardous

Not hazardous

Not hazardous

Not hazardous

Non-orthophthalate

Not hazardous

Not hazardous

Not hazardous

Not hazardous

Organic pigments

Not hazardous

Not hazardous

Not hazardous

Not hazardous

Thickener

Not hazardous

Not hazardous

Not hazardous

Not hazardous

Titanium dioxide (in some formulas)

Not hazardous

Not hazardous

Not hazardous

Not hazardous

SECTION III  – PHYSICAL DATA /  CONTENTS WITHOUT PROPELLENT

BOILING POINT:

380°C

SPECIFIC GRAVITY (H2O=1):

N/A

VAPOR PRESSURE (mm Hg):

1.2 @ 200°C

MELTING POINT:

N/A

VAPOR DENSITY (AIR = 1): 

16

EVAPORATION RATE (Butyl Acetate = 1):

<0.1

SOLUBILITY IN WATER:

0.005%

APPEARANCE AND ODOR:

VARIOUS COLORED PASTES.  Low odor.

                     

 

SECTION IV: FIRE AND EXPLOSION  HAZARD DATA

 

FLASH POINT (METHOD USED):

425°F

FLAMMABLE LIMITS

N/A

 

EXTINGUISHING MEDIA:

WATER FOG  x

STANDARD FOAM  x

CO2 x

 

DRY CHEMICAL  x

HALON 

 

 

UNUSUAL FIRE AND EXPLOSION HAZARDS:

Toxic gases evolved when burned.

SPECIAL PRECAUTIONARY STATEMENTS:

Self-contained breathing apparatus.

 

 

SECTION V: REACTIVITY DATA

STABILITY: 

x Stable  Unstable

Incompatibility :

None

Hazardous Decomposition:

Smoke, soot, CO, CO₂, and hcl vapor when burned.

HAZARDOUS POLYMERIZATION:     

May Occur   xWill not occur

Conditions to Avoid:

High heat will get the material.

SECTION VI: HEALTH HAZARD DATA

ROUTES OF ENTRY & HEALTH  HAZARDS (ACUTE AND CHRONIC)

INGESTION:  

N/A

EYES:                  

N/A

INHALATION:       

Inhalation of fumes during heat processing

SKIN:

Skin absorbtion.

EMERGENCY AND FIRST AID  PROCEDURES

INGESTION:

Consult physician.

EYES:

Flush with water for 15 minutes.

INHALATION:

If excessive fumes, remove to fresh air.

SKIN:

Wash skin with soap and water.

 

SECTION VII: PRECAUTIONS FOR  SAFE HANDLING AND USE

STEPS TO BE TAKEN IN CASE LARGE AMOUNTS ARE RELEASED:

Treat as non-hazardous material.

WASTE DISPOSAL METHOD:

Not hazardous.  Non-toxic.

PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE:

Optimum storage temperature 50°F to 90°F.

OTHER PRECAUTIONS:

During, processing, ventilation is recommended.  If thinners or reducers are added, hazards may increase.  See MSDS specific additives or call manufacturer.

 

SECTION VIII: CONTROL MEASURES

RESPIRATORY PROTECTION:

Not required

VENTILATION:

Recommended during process.

LOCAL EXHAUST:

Recommended during process.

PROTECTIVE GLOVES:

Not required, but rubber/neoprene

EYE PROTECTION:

N/A

 

SECTION IX: SPECIAL  PRECAUTIONS

HEALTH:  1

HAZARD RATING KEY

FLAMMABILITY: 1

0 = MINIMAL

REACTIVITY:  0

1 = SLIGHT

PERSONALPROTECTION:

2 = MODERATE

 

3 = SERIOUS

 

4 = SEVERE

 

* = CHRONIC HEALTH EFFECTS

Disclaimer:  The  information contained herein is based on the data available to us and is  believed to be accurate.  However, no warranty is expressed or implied regarding  the accuracy of this data or the results to be obtained from the use thereof. We  assume no responsibility for injuries from the use of the product described  herein.

Subscribe

We invite you to subscribe to receive our news bulletins that will contain announcements of new products, training, pecials and other vital information to help you become more profitable in your business. Please take this opportunity to subscribe. Don't miss out on an important new product announcement or a training date!

"On Sale"

Prices effective through 03/30/2012 P/N DESCRIPTION SPECIAL FCPA-A Carpet Protector Adhesive 8.39 BFG Black Flex Grip— Great for Plastics 4.87 Delta 9 Healight Sealant 39.96 FHT Fitzgerald’s Heat Torch 49.00 6082 Aerosol Velour Spray Adhesive 9.31 VT44 4 Pack, Graining PAPERS 6.91 GC-4 4 oz Graining Compound 7.59

Training & Products

Call 800.441.3326 for more information on our next training seminar.” NEW AT FITZGERALD'S See our new products.