INGREDIENT CHEMICAL NAME

OSHA PEL

ACGIH TLV

OTHER LIMITS RECOMMENDED

CAS NUMBER

N/A

N/A

N/A

N/A

N/A

BOILING POINT:

N/A

SPECIFIC GRAVITY (H2O=1):

N/A

VAPOR PRESSURE (mm Hg):

N/A

MELTING POINT:

N/A

VAPOR DENSITY (AIR = 1): 

Heavier than air

EVAPORATION RATE (Butyl Acetate = 1):

Slower than ether

SOLUBILITY IN WATER:

N/A

APPEARANCE AND ODOR:

N/A

FLASH POINT (METHOD USED):

>350°F

FLAMMABLE LIMITS

N/A

EXTINGUISHING MEDIA:

WATER FOG  x

STANDARD FOAM  x

CO₂ x

DRY CHEMICAL  x

HALON 

UNUSUAL FIRE AND EXPLOSION HAZARDS:

Closed containers may explode when exposed to extreme heat.

SPECIAL PRECAUTIONARY STATEMENTS:

When burned or subject to temperatures in excess of 300°F for excessive time, hydrogen chloride is emitted.  Avoid breathing combustion products or use self-contained breathing apparatus.

STABILITY: 

x Stable  Unstable

Incompatibility :

Oxidizing material can cause a reaction.

Hazardous Decomposition:

Hydrogen chloride, carbon monoxide and carbon dioxide at elevated temperatures.

HAZARDOUS POLYMERIZATION:     

May Occur  xWill not occur

Conditions to Avoid:

Prolonged exposure to temperatures above 300°F.

INGESTION:  

N/A

EYES:                  

Acute exposure may cause irritation.

INHALATION:       

Acute exposure may cause irritation.  Fumes emitted during fusion may aggravate an existing respiratory tract ailment.

SKIN:

Acute exposure may cause irritation.  May aggravate an existing dermatitis.

INGESTION:

N/A

EYES:

In case of eye contact, remove excess material with cloth or absorbent paper, then rinse out eye with copious amounts of water for at least 15 minutes.  If irritation persists, seek medical attention.

INHALATION:

In case of excessive inhalation of fumes, remove to fresh air.

SKIN:

Incase of skin contact, remove excess material with cloth or absorbent paper, then wash with soap and water.

STEPS TO BE TAKEN IN CASE LARGE AMOUNTS ARE RELEASED:

Scoop into drums, absorb remainder on inert filler. 

WASTE DISPOSAL METHOD:

Dispose of in accordance with local, state and federal regulations.

PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE:

Avoid contact with eyes, skin and clothing.  Although hazard, this product should not be stored in direct sunlight or temperatures exceeding 110°F.

OTHER PRECAUTIONS:

Never use pressure to empty drums or other shipping containers-they are not pressure vessels.  Do not weld or flame-cut empty drums.  Drums must not be reused for other purposes.

RESPIRATORY PROTECTION:

Not required with adequate ventilation.  In restricted ventilation areas wear approved chemical/mechanical filters to remove fumes or mist.

VENTILATION:

Exhaust system should be sufficient to remove vapors emitted during fusion.

LOCAL EXHAUST:

N/A

PROTECTIVE GLOVES:

Use neoprene or vinyl gloves, protective clothing if skin contact is likely.

EYE PROTECTION:

Safety goggles.

HEALTH:

HAZARD RATING KEY

FLAMMABILITY:

0 = MINIMAL

REACTIVITY:

1 = SLIGHT

PERSONALPROTECTION:

2 = MODERATE

3 = SERIOUS

4 = SEVERE

* = CHRONIC HEALTH EFFECTS